User Guide

Thank you for choosing Rejuvulite™—a compact, high-performance red light device designed for simplicity, reliability, and everyday use.

Charging the Device

Rejuvulite can be charged in two ways: wirelessly (NFC/Qi) or with a USB-C cable.

  • NFC / Wireless Charging: Place Rejuvulite on any Qi-compatible charging pad. The red indicator LED will illuminate while charging.
  • USB-C Charging: Connect a USB-C cable to any standard power source (such as a phone charger or computer port). The green indicator LED will illuminate while charging.

Charging automatically stops when the internal battery reaches full capacity. A complete charge typically takes 2–3 hours depending on the power source.

Power Activation

Rejuvulite is designed for ease of use and energy efficiency. Simply press the main power button to begin a session. The device will automatically activate full power when held close to a surface or object and will enter standby mode when moved away.

Each button press initiates a two-minute session. The LEDs will automatically turn off after the session completes.

Battery Notes

  • If the battery becomes fully depleted, the device may not respond immediately to wireless charging.
  • To “jump start” the battery, connect Rejuvulite to a USB-C charger for 10–15 minutes. Once the indicator LED lights up, wireless charging will function normally again.

Maintenance and Care

  • Keep the device clean and dry. Wipe with a soft, slightly damp cloth if needed.
  • Do not submerge the unit in water or expose it to solvents.
  • Store at room temperature away from direct sunlight or excessive heat.

Safety Information

  • Do not stare directly into the LEDs during operation.
  • Use only as intended. Rejuvulite is not a medical device and is not designed to diagnose, treat, cure, or prevent any disease.
  • Discontinue use if irritation or discomfort occurs.
  • Keep out of reach of children.

Warranty and Support

Rejuvulite devices are backed by a one-year limited warranty against defects in materials and workmanship. If you encounter any issues, please reach out through our Contact page.

Thank you for supporting engineering-driven design and innovation.